LabVIEW Embedded Module for ARM Microcontrollers 1.1 - Windows Vista x64/Vista x86/XP

제품 등록 / 업그레이드

메시지: 본 제품은 활성화가 필요합니다.

설명

The LabVIEW Embedded Module for ARM Microcontrollers is a comprehensive graphical development environment for embedded design. Jointly developed by Keil–An ARM Company and National Instruments, this module seamlessly integrates the LabVIEW graphical development environment and ARM microcontrollers. You can lower development costs and achieve faster development times by using the Embedded Module for ARM Microcontrollers to program ARM targets.

This module builds on NI LabVIEW Embedded technology, which facilitates dataflow graphical programming for embedded systems and includes hundreds of analysis and signal processing functions, integrated I/O, and an interactive debugging interface. With the Embedded Module for ARM Microcontrollers, you can optimize linking and view live front panel updates using JTAG, serial, or TCP/IP. The Embedded Module for ARM Microcontrollers includes the LabVIEW C Code Generator, which generates Ccode from the LabVIEW block diagram.

특징

설치 안내

Complete the following steps to install the RealView Microcontroller Development Kit and the Embedded Module for ARM Microcontrollers.

1. Log in as an administrator or as a user with administrator privileges.
2. Run the attached self-extracting executable and select to install the RealView Microcontroller Development Kit.

Tip If the installer does not automatically begin, double-click MDK_LV.exe to begin installation of the RealView Microcontroller Development Kit.
3. Follow the instructions on the screen for installing the RealView Microcontroller Development Kit.
4. Activate the Keil µVision License ID Code (LIC). Complete the following steps to activate the LIC.
1. Launch Keil µVision by selecting Start»All Programs»Keil uVision3.
2. Select File»License Management to display the License Management dialog box.
3. Click the Help button to open the ARM Development Tools help file.
4. Follow the instructions for obtaining a single-user license. You need an internet connection and a product serial number (PSN) to activate the license. The PSN is an alphanumeric value located on the Certificate of Ownership or license card included with purchased products.
5. After you add the LIC to the License Management dialog box, click the Close button to close the dialog box.
6. Exit Keil µVision before installing the Embedded Module for ARM Microcontrollers.

Refer to the Keil Web site at www.keil.com/license for more information about activating Keil µVision.
5. If the installer welcome screen is still visible, select to install the Embedded Module for ARM Microcontrollers. If the installer welcome screen is not visible, double-click setup.exe to begin installation of the Embedded Module for ARM Microcontrollers.
6. Follow the instructions on the screen for installing the Embedded Module for ARM Microcontrollers. The installer installs both LabVIEW with embedded support and the Embedded Module for ARM Microcontrollers.

(Luminary Micro EK-LM3S8962) On the Features page of the installer, select to install the Luminary Micro Driver for EK-LM3S8962 to install the drivers for the Luminary Micro evaluation board. A Software Installation alert might appear during the driver installation. Click the Continue Anyway button to continue with the installation.
7. Follow the activation instructions that appear on the screen.
   You also can use the NI License Manager, available by selecting Start»All Programs»National Instruments»NI License Manager, to activate National Instruments products. Refer to the National Instruments License Manager Help, available by selecting Help»Contents in the NI License Manager, for more information about activating NI products.
8. Restart the computer when the installer prompts you and log in as an administrator or as a user with administrator privileges.

설치 노트

The Embedded Module for ARM Microcontrollers installer includes LabVIEW 8.6 with embedded support. If you have LabVIEW 8.6.x already installed, you can install LabVIEW with embedded support without first uninstalling LabVIEW 8.6.x. However, you must install the RealView Microcontroller Development Kit before you install the Embedded Module for ARM Microcontrollers.

System Requirements

The Embedded Module for ARM Microcontrollers has the following requirements:

• A desktop computer with Windows Vista/XP
• RealView Microcontroller Development Kit including Keil µVision3
• LabVIEW 8.6 with embedded support
• Keil ULINK2 USB-JTAG adaptor

Refer to the LabVIEW Release Notes, available by selecting Start»All Programs»National Instruments»LabVIEW»LabVIEW Manuals and opening LV_Release_Notes.pdf, for information about LabVIEW development system requirements.

더 많은 정보

피드백