Academic Über NI Veranstaltungen NI Developer Zone Support Lösungen Online Store Kontakt MyNI

NI-DAQmx Base 3.2 - Mac OS X

5 Bewertungen | 4.60 von 5
Dokument drucken

Verfügbare Downloads:

Standard-Download: NI-DAQmx_Base_3.2.0.dmg(227 MB)

Ergänzende Dateien:

Download-Sprache : Englisch
Produktfamilie: Multifunction DAQ
Version: 3.2
Erscheinungsdatum: 07-2008
Softwaretyp: Hardware Driver
Betriebssystem: Mac OS X

Beschreibung

Thank you for using NI-DAQmx Base, version 3.2 for Mac OS X.

The NI-DAQmx Base 3.2 software provides LabVIEW and C Application Programming Interfaces (APIs) which allows you to create applications for your National Instruments DAQ devices which will run on Mac OS X.

The following main features were added in NI-DAQmx Base 3.2

  • New Device Support—Added support for the NI USB-9234
  • DAQmxBase Properties—Properties for NI USB-9234 and AO Regeneration.
  • LabVIEW 8.6 Support—in addition to LabVIEW 8.5 and LabVIEW 8.2.
  • OS Support—NI-DAQmx Base now supports the following versions of Mac OS X:
    • Mac OS X 10.4 (Tiger) on Intel or PowerPC (10.4.8 or later)
    • Mac OS X 10.5 (Leopard) on Intel or PowerPC

Refer to the NI-DAQmx Base Readme for more information about the NI-DAQmx Base driver and differences between NI-DAQmx Base and NI-DAQmx.

Leistungsmerkmale

  • Support for over 80 National Instruments DAQ devices including several USB DAQ devices.
  • A high-level interface based on a subset of the popular NI-DAQmx driver for DAQ Devices on Mac OS X.
  • Numerous examples demonstrating the use of both the C or LabVIEW APIs.

Anleitungen zur Installation

  1. Download NI-DAQmx_Base_3.2.0.dmg
  2. Double click on NI-DAQmx_Base_3.2.0.dmg to launch the disk image
  3. Double click on NI-DAQmx_Base_3.2.0.mpkg to run the NI-DAQmx Base installer

Weiterführende Informationen

Feedback