院校资源 关于NI 培训与活动 NI Developer Zone 技术支持 应用案例 产品与服务 联系NI MyNI

NI-DAQmx 8.8 - Windows 2000/Vista x64/Vista x86/XP

38 评分 | 3.97 之 5
打印本文

可用下载:

下载选项:

1.
NI Downloader: NI-DAQmx 8.8 Downloader(1026 MB)
NI推荐

NI推荐适合Windows操作系统的NI Downloader。 NI Downloader:
  • 提供更稳定的文件下载
  • 意外中断时, 可自行继续文件下载
  • 文件下载期间, 临时在PC上运行
  • 提供"暂停和继续" 功能

2.
标准下载: NIDAQ880f2.exe(1026 MB). 标准下载:
  • 直接下载至PC
  • 连接问题可能会引发意外中断, 所以文件下载较不稳定
  • 不提供"暂停和继续" 功能

支持性文件:

下载语言: 简体中文; 英文; 法文; 德文; 日文; 韩文
产品线: Multifunction DAQ
版本: 8.8
发布日期: 08-2008
软件类型: Hardware Driver
操作系统: Windows 2000; Windows Vista x64; Windows Vista x86; Windows XP

说明

Thank you for using NI-DAQmx, version 8.8.

NI-DAQmx 8.8 is the latest measurement services software for your data acquisition and signal conditioning devices.

The following main features were added in NI-DAQmx 8.8:

  • Newly supported devices in NI-DAQmx—
    • Wireless and Ethernet Network DAQ Devices: NI ENET-9211, NI ENET-9215, NI ENET-9219, NI ENET-9234, NI ENET-9237, NI WLS-9211, NI WLS-9215, NI WLS-9219, NI WLS-9234, and NI WLS-9237.
    • C Series Devices for NI cDAQ-9172: NI 9213, NI 9237 (DSUB), NI 9426, NI 9475, and NI 9478
    • PXIe Devices: NI PXIe-4496, NI PXIe-4498, and NI PXIe-6124
    • Academic and USB Devices: NI ELVIS II and NI USB-9213
    Refer to Device Support in the NI-DAQ Readme for a complete list of devices.
  • NI LabVIEW 8.6 support in addition to LabVIEW 8.5, LabVIEW 8.2 and LabVIEW 7.1
  • Visual Studio 2008 and .NET 3.5 Support in addition to Visual Studio 2005 and 2003.
  • Support for global channels in DAQ Assistant and LabVIEW SignalExpress.
  • Fixes for 25 customer reported issues. Refer to Fixed Issues in the NI-DAQ Readme for a list of fixed issues.

安装说明

Perform the following steps to install NI-DAQmx:

  1. Download and run the self-extracting executable NIDAQ880f1.exe.
    This will install NI-DAQmx 8.8.0 and all necessary driver files.
  2. You can optionally download and run the self-extracting executable for the NI-DAQmx Device Documentation 8.8. (Linked Below)
    This will install the device documentation for the hardware supported in this release of NI-DAQ.

To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future or you need to include the NI-DAQmx installer in a installer you build.

安装注意事项

The NI-DAQmx installer is packaged as a self-extracting archive that will automatically launch the driver installer. By default, files are extracted to C:\National Instruments Downloads\NI-DAQmx\8.8\ and can be deleted to conserve disk space. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future.

安装来源

更多信息

反馈