Éducation Société Événements NI Developer Zone Support Solutions Produits et Services Contacter NI MyNI

NI-DAQmx 8.7.2 - Windows 2000/Vista x64/Vista x86/XP

18 évaluations | 3.33 parmi 5
Imprimer le document

Téléchargements disponibles:

Téléchargement standard: NIDAQ872f1_downloader.exe(130 KB)

Fichiers supportés:

Langue de téléchargement: Chinois simplifié; Anglais; Français; Allemand; Japonais; Coréen
Ligne de produits: Multifunction DAQ
Version: 8.7.2
Date de parution: 08-2008
Type de logiciel: Hardware Driver
Système d'exploitation: Windows 2000; Windows Vista x64; Windows Vista x86; Windows XP

Description

Thank you for using NI-DAQmx, version 8.7.2. This minor release fixes several small issues with 8.7.1 and adds support for the newest version of LabVIEW.

NI-DAQmx 8.7.2 can be obtained by either using the National Instruments Downloader available above, or directly at http://ftp.ni.com/support/softlib/multifunction_daq/nidaqmx/8.7.2/NIDAQ872f1.exe. When the National Instruments Downloader completes downloading the distribution you will be able to launch the installer. The National Instruments Downloader will automatically remove itself from your computer after it completes.

The following main features were added in NI-DAQmx 8.7.2:

  • NI LabVIEW 8.6 support in addition to LabVIEW 8.5, LabVIEW 8.2 and LabVIEW 7.1
  • Visual Studio 2008 and .NET 3.5 Support in addition to Visual Studio 2005 and 2003.
  • The following issues were fixed in this release:
    • Add Runtime 5 flavor back to NI-DAQmx PDF
    • On Traditional Chinese OS, Simplified Chinese characters are used for NI Device Monitor
    • PXI-4462 fails to calibrate under 8.7.1

Instructions d'installation

Perform the following steps to install NI-DAQmx:

  1. Download and run the self-extracting executable NIDAQ872f1.exe.
    This will install NI-DAQmx 8.7.2 and all necessary driver files.
  2. You can optionally download and run the self-extracting executable for the NI-DAQmx Device Documentation 8.7.2. (Linked Below)
    This will install the device documentation for the hardware supported in this release of NI-DAQ.

To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future.

Notes d'installation

The NI-DAQmx installer is packaged as a self-extracting archive that will automatically launch the driver installer. By default, files are extracted to C:\National Instruments Downloads\NI-DAQmx\8.7.2\ and can be deleted to conserve disk space. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future.

Ressources pour l'installation

Plus d'information

Commentaires