NI-RFSA 2.1 - Windows 2000/Vista x64/Vista x86/XP

0 평가 등급 | 0.00 중 5

인쇄

제품 등록 / 업그레이드

이 업그레이드는 자동적으로 SSP 및 프리미어 고객에게 제공됩니다. 업그레이드에 관심이 있으시다면, 업그레이드 어드바이저를 확인하세요.

설명

NI-RFSA version 2.1 for Windows Vista / XP / 2000.

NI-RFSA 2.1 includes the following new features:

• Support for the NI PXIe-5663 RF vector signal analyzer
• Support for the NI PXI-5600 RF downconverter in downconverter-only mode
• Support for the NI PXIe-5601 RF downconverter in downconverter-only mode
• The NI-RFSA Soft Front Panel for the NI PXI-5661 and NI PXIe-5663

• NI PXI-5663 RF Vector Signal Analyzer
• NI PXI-5661 RF Vector Signal Analyzer
• NI PXI-5660 RF Vector Signal Analyzer (Vista x86 / XP / 2000 Only)
• NI PXI-5600 RF Downconverter
• NI PXI-5601 RF Downconverter

Note: The NI-RFSA installer package installs the NI-RFSA driver API for use with the PXI-5663 and PXI-5661. It also installs the ni5660 driver API for use with the PXI-5660 in LabVIEW. The NI-RFSA driver API does not currently support the PXI-5660. Use in a C-based ADE requires programming with separate NI-Tuner and NI-Scope driver calls, with both drivers installed by the NI-RFSA installer package.

Minimum Application Development Environments:

You can use NI-RFSA in the LabVIEW and LabWindows/CVI application development environments (ADEs). The minimum versions of these ADEs that can be used with NI-RFSA are listed below.

• LabVIEW version 7.1*, 8.2, 8.5, or 8.6 Full Development System or Professional Development System
• LabVIEW 8.5 or 8.6 Real-Time Module (not supported with NI PXI-5660)
• LabWindows™/CVI™ version 7.1, 8.0, 8.1, or 8.5
• LabWindows/CVI Real-Time Module (not supported with NI PXI-5660)
• Any C compiler capable of calling a 32-bit DLL

Supported Hardware:

NI PXI-5663, NI PXI-5661, NI PXI-5660, NI PXI-5600, NI PXI-5601

피드백

내용 평가 등급을 선택하세요. 1 2 3 4 5
질문에 대한 답변이 되셨습니까? 예 아니오