NI ELVIS Software 3.0.3 - Windows 2000/Vista x86/XP

5 評分 | 3.40 之 5

列印檔案

說明

NI ELVIS Traditional 3.0.3 is the driver software that supports the National Instruments Educational Laboratory Virtual Instrumentation Suite (NI ELVIS). NI ELVIS uses LabVIEW-based software instruments, a multifunction DAQ device, and a custom-designed benchtop workstation and prototyping board to provide the functionality of a suite of common laboratory instruments.

NI ELVIS Traditional 3.0.3 is an upgrade to NI ELVIS 3.0 and contains the NI ELVIS soft front panel (SFP) instruments, LabVIEW Express VIs and SignalExpress steps for programming the NI ELVIS hardware. For more information on what is new in NI ELVIS Traditional 3.0.3, refer to the readme file.

NI ELVIS Traditional 3.0.3 installs NI-DAQmx 8.7.2 by default. If you do not want to install NI-DAQmx 8.7.2, you can download the NI ELVIS Traditional 3.0.3 software without DAQmx here.

安裝說明

To install NI ELVIS Traditional 3.0.3, download and run the self-extracting executable NIELVIS303.exe.
This will install NI ELVIS Traditional 3.0.3 and all necessary driver files.

To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from the NI ELVIS distribution in the future.

安裝注意事項

The NI ELVIS Traditional 3.0.3 installer is packaged as a self-extracting archive that will automatically launch the driver installer. By default, files are extracted to C:\National Instruments Downloads\NI ELVIS\3.0.3\ and can be deleted to conserve disk space. It is recommended that you keep the extracted installation files in case you need to add features from the NI ELVIS distribution in the future.

反馈

给本文档评级 选择级别 1 2 3 4 5
Answered Your Question? 是 否