NI-VXI 3.5.2 - Windows 2000/XP

啟動/升級

SSP 及 Premier 用戶可取得自動升級，若您亦對此項升級有興趣，請使用 Upgrade Advisor。 。

說明

NI-VXI is the interface software for your National Instruments VXI controller. It provides the necessary driver to access devices on any VXI bus attached to your workstation. Using NI-VXI, you can control a VXI bus using National Instruments VXIpc embedded controllers, MXI-2 extender technology, VXI-1394 controllers, VXI-8340 series controllers, VXI-USB controllers, VXI-8360 series controllers, or a combination of any of these controllers. Version 3.5.2 of this software supports Windows XP and Windows 2000. Refer to your hardware documentation for specific Operating System requirements.

安裝說明

1. Create a temporary folder on your local hard drive 2. Extract the NIVXI352.zip file into the folder created in Step 1. This will create the installation files necessary for installing NI-VXI 3. Review ReadMe.txt located in the extracted folder 4. Run setup.exe to launch the NI-VXI installer

安裝注意事項

The installation process for NI-VXI includes installing NI-VISA, MAX, the NI-VXI 3 driver and associated configuration files, and the NI-VXI API emulation layer included with NI-VXI 3. Optionally, the installer can also install development utilities and documentation related to the NI-VXI API. NI-VXI stores various configuration options and associated applications in a folder located by default in Program Files\National Instruments\VXI. You can also specify a different location to install these files. By default, the NI-VXI API emulation layer is installed. This library provides a familiar programming interface and utility package for users of older versions of NI-VXI. If you are not a current NI-VXI 1.x/2.x user, or if you currently use VISA as your programming interface, there is no need to install this option.

反馈