Traditional NI-DAQ (Legacy) 4.8.0 - DOS, Windows 3.1

Description

This is NI-DAQ version 4.8.0. This is the last version of NI-DAQ to support DOS.

Note: NI-DAQ and DOS programming is no longer supported by National Instruments.

Download the Readme file for installation instructions. If you need the driver in individual 1.44MB segments, they are attached below.

Note: NI-DAQ 4.8.0 does not support LabWindows for DOS. If this is your programming environment, you need to install NI-DAQ 4.6.1.

Your Feedback