Traditional NI-DAQ (Legacy) 4.8.0 - DOS, Windows 3.1

0 calificación | 0.00 fuera de 5

Descargas Disponibles:

Descarga Estándar: Traditional DAQ 4.80(7 MB)

Archivos de Soporte:

ReadMe (1 KB)
Installation Instructions (1 KB)
00licens.txt (1 KB)
480-1.zip (1 MB)
480-5.zip (1,273 KB)
480-3.zip (1,273 KB)
480-2.zip (1,273 KB)
480-4.zip (1,273 KB)
480-6.zip (1,273 KB)

Descargar Idioma: Inglés
Línea de Producto: Multifunction DAQ
Versión: 4.8.0
Fecha de Lanzamiento: 11-1999
Tipo de Software: Hardware Driver
Sistema Operativo: DOS; Windows 3.1

Descripción

This is NI-DAQ version 4.8.0. This is the last version of NI-DAQ to support DOS.

Note: NI-DAQ and DOS programming is no longer supported by National Instruments.

Download the Readme file for installation instructions. If you need the driver in individual 1.44MB segments, they are attached below.

Note: NI-DAQ 4.8.0 does not support LabWindows for DOS. If this is your programming environment, you need to install NI-DAQ 4.6.1.

Traditional NI-DAQ (Legacy) 4.8.0 - DOS, Windows 3.1

Descargas Disponibles:

Descripción

Comentarios