Traditional NI-DAQ (Legacy) 4.8.0 - DOS, Windows 3.1

0 평가 등급 | 0.00 중 5

인쇄

사용가능한 다운로드:

표준 다운로드: Traditional DAQ 4.80(7 MB)

지원 파일:

다운로드 언어: 영어
제품군: Multifunction DAQ
버전: 4.8.0
출시일: 11-1999
소프트웨어 타입: Hardware Driver
운영체제: DOS; Windows 3.1

This is NI-DAQ version 4.8.0. This is the last version of NI-DAQ to support DOS.

Note: NI-DAQ and DOS programming is no longer supported by National Instruments.

Download the Readme file for installation instructions. If you need the driver in individual 1.44MB segments, they are attached below.

Note: NI-DAQ 4.8.0 does not support LabWindows for DOS. If this is your programming environment, you need to install NI-DAQ 4.6.1.