Traditional NI-DAQ (Legacy) 4.9.0f1 - Windows 3.1/95/98/NT

2 ratings | 4.00 out of 5

Print Document

Description

This is version 4.9.0f1 of the NI-DAQ driver for Windows. This is the last version of NI-DAQ to support the DSP-2200, AT-A2150, and EISA-A2000 cards.

[Note:] The User Manual for each version of NI-DAQ contains information about the data acquisition hardware supported by that version of NI-DAQ (in a section called NI-DAQ Hardware Support, Chapter 1 [Introduction to NI-DAQ]). See the [NI-DAQ User Manual for PC Compatibles (Version 4.9)] for more information.

You may also be interested in our [Data Acquisition Installation Wizard], if you need installation troubleshooting assistance.

[Important Note:] Windows NT 4.0 users must also download and install the 4.9.0f2 upgrade in order for NI-DAQ 4.9.0 to function properly under Windows NT 4.0.

Install Notes

If you are using AT-DSP2200, AT-DSP2150, or EISA-A2000 hardware, you should keep your current version of NI-DAQ. Please verify the NI-DAQ driver version that currently supports your board. Otherwise, upgrade to the latest version of NI-DAQ to gain maximum performance and hardware compatibility.

Your Feedback

Rate this document: Select a rating! 1 2 3 4 5
Answered Your Question? Yes No