NI-DAQmx 8.3.1 - Windows 2000/XP

13 ratings | 2.62 out of 5

Print Document

Description

NI-DAQmx 8.3.1 is the latest measurement services software for your data acquisition and signal conditioning devices. NI-DAQmx 8.3.1 contains support for:

• Newly supported devices in NI-DAQmx—NI PCIe-6536 and NI PCIe-6537. Refer to Device Support for a complete list of devices.
• NI LabVIEW 8.2 support in addition to LabVIEW 8.0 and LabVIEW 7.1
• NI CompactDAQ chassis and C Series I/O module support — NI cDAQ-9172
• PXI Express M Series the world's first PXIe measurement devices
• M Series USB — NI USB-625x, NI USB-622x, and NI USB-621x
• Additional NI-DAQmx installer types -- Create installers that bundle various sizes of NI-DAQmx.
• Querying of DAQ device capabilities including available physical channels and bus type.

For more information on NI-DAQmx features and benefits, click here. For more information on what is new in NI-DAQmx 8.3.1, refer to the NI-DAQ Readme, accessible from Start>>Programs>>National Instruments>>NI-DAQ after you install NI-DAQmx as described below.

National Instruments supports the latest version of NI-DAQmx for Windows driver software for application development with NI LabVIEW, LabWindows/CVI, and Measurement Studio 7.1 or later on Windows 2000/XP.

Installation Instructions

1. Create a temporary folder on your local hard drive.
2. Extract the NIDAQ831.zip file into the folder created in Step 1. This creates the installation files necessary for installing NI-DAQmx.
3. To launch the NI-DAQmx installer, run the autorun.exe program from the NIDAQ831 directory and the startup.exe program from the DocBrowser directory.

Your Feedback

Rate this document: Select a rating! 1 2 3 4 5
Answered Your Question? Yes No