NI-DAQmx 8.0.1 - Windows 2000/XP

7 ratings | 3.00 out of 5

Print Document

Description

NI-DAQmx 8.0.1 is the latest measurement services software for your data acquisition and signal conditioning devices. NI-DAQmx 8.0.1 sets the standard for ease-of-use and performance through:

• Support for LabVIEW 8 -- LabVIEW Project, Shared Variable, etc..
• Support for the world's first PCIe data acquisition devices .
• OPC connectivity with devices supported by NI-DAQmx .
• NI-DAQmx Device Monitor to detect USB devices when plugged in and pop-up dialog box where you can choose to run test panels, launch MAX, or launch VI Logger.
• Human-readable configuration import/export from MAX for NI-DAQmx configuration data.
• Usability improvements and features enhancements to DAQ Assistant.
• LabVIEW support for synchronous and asynchronous DAQ events.
• Querying of DAQ device capabilities including available physical channels and bus type.
• Create a printable report in MAX detailing your NI-DAQmx hardware configuration.

For more information on NI-DAQmx features and benefits, click here. For more information on what is new in NI-DAQmx 8.0.1, refer to the NI-DAQ Readme, accessible from Start>>Programs>>National Instruments>>NI-DAQ after you install NI-DAQmx as described below.

National Instruments supports the latest version of NI-DAQmx for Windows driver software for application development with NI LabVIEW, LabWindows/CVI, and Measurement Studio 7.x or later on Windows 2000/XP.

Installation Instructions

1. Create a temporary folder on your local hard drive.
2. Extract the NIDAQ801.zip file into the folder created in Step 1. This creates the installation files necessary for installing NI-DAQmx.
3. To launch the NI-DAQmx installer, run the autorun.exe program created in Step 2.

Your Feedback

Rate this document: Select a rating! 1 2 3 4 5
Answered Your Question? Yes No