NI-DAQmx 7.5 - Windows 2000/NT/XP

6 ratings | 2.67 out of 5

Print Document

Description

NI-DAQmx 7.5 is the latest measurement services software for your data acquisition and signal conditioning devices. NI-DAQmx 7.5 sets the standard for ease-of-use and performance through:

• Support for NI-DAQmx simulated devices
• Automatic code generation with the DAQ Assistant
• Custom scaling to engineering units with virtual channels and TEDS plug-and-play sensors
• Dynamic display of terminal connections for channels
• Cleaner code development with new VIs and functions
• Up to 1000 times faster performance with multi-threading and optimized single-point I/O
• Improved Real-Time performance with LabVIEW

For more information on NI-DAQmx features and benefits, click here. For more information on what is new in NI-DAQmx 7.5, refer to the NI-DAQ Readme, accessible from Start>>Programs>>National Instruments>>NI-DAQ after you install NI-DAQmx as described below.

Installation Instructions

1. Create a temporary folder on your local hard drive.
2. Extract the NIDAQ750.zip file into the folder created in Step 1. This creates the installation files necessary for installing NI-DAQmx.
3. To launch the NI-DAQmx installer, run the autorun.exe program created in Step 1

VI Logger Lite Installation Instructions:

VI Logger Lite is automatically installed by default when you install NI-DAQmx 7.5.

Your Feedback

Rate this document: Select a rating! 1 2 3 4 5
Answered Your Question? Yes No