ECU Measurement and Calibration Toolkit 2.1 - PharLap, Windows 2000/Vista x64/Vista x86/XP

4 ratings | 2.25 out of 5

Available Downloads:

Standard Download: NIECUMC21.exe(199 MB)

Supporting Files:

readme.htm (26 KB)

Download Language: English
Product Line: CAN
Version: 2.1
Release date: 05-2007
Software type: Addon/Toolkit
Operating system: PharLap; Windows 2000; Windows Vista x64; Windows Vista x86; Windows XP

Activations/Upgrades

Message: To use this product you must activate it!

Description

The ECU Measurement and Calibration (ECU M&C) Toolkit contains a development system for electronic control units (ECU) based on existing ASAM standards. The function set of the ECU M&C Toolkit enables engineers to optimize and verify the functionality of electronic controller devices. The ECU M&C Toolkit uses the CCP protocol as the fundamental communication protocol files with National Instruments CAN hardware products or the Universal Measurement and Calibration Protocol (XCP) on CAN and Ethernet (TCP and UDP)and supports ECU database files (*.A2L).

Features

Support of LabVIEW 8.2.1
Support for NI USB-8473 (1 Port, High-Speed CAN, USB interface) and NI USB-8473s (1 Port, High-Speed CAN)
Support for the 32 and 64-bit versions of Windows Vista

Activation Instructions

When you run the ECU M&C Toolkit for the first time, it will prompt you to activate a license for the product. If you do not activate a valid license, the ECU M&C Toolkit will run in Evaluation Mode and continue to prompt you to activate a license on each subsequent launch. When you run the ECU M&C Toolkit in Evaluation Mode, the software behaves as a fully-functional Development System for 30 days. ECU M&CToolkit Evaluation software will expire after 30 days. You can activate your ECU M&C Toolkit license at any point during the 30-day evaluation period. For more information on activating your product, visit the Link below.

Installation Instructions

Execute the NIECUMC21.exe file. The self-extracting executable will create the installation files necessary for installing the ECU M&C Toolkit and then start the installation. After the installation completes, you may delete the installation image to recover disk space. You should not delete the installation image if you wish to be able to modify or repair the installation in the future.

Install Notes

To learn more about the ECU M&C Toolkit, please refer to the readme.htm file.