NI-SCOPE 3.3.2 - Windows 2000/Vista x64/Vista x86/XP

5 ratings | 2.80 out of 5

Print Document

Description

NI-SCOPE 3.3.2 is only included on the August 2007 edition of the Device Drivers CD. This CD provides drivers for most of National Instruments hardware.

NI SCOPE 3.3.2 contains all the features of NI SCOPE 3.3.1 and adds:

• Support for LabVIEW 8.5
Supported Hardware:
NI PCI-5152, NI 5105, PXIe-5122, NI 5122, NI 5124, NI 5142, NI 5102, NI 5112, NI 5114, NI PXI-5152, NI 5620, NI 5621, NI 5911, NI 5922

Minimum Application Development Environments for NI-SCOPE 3.3.2:
• LabVIEW 7.1.1 or later
• LabVIEW Real-Time Module 7.1.1 or later (If you are running your application on an RT target, at least 128 MB of memory is required)
• LabWindows/CVI 7.1 or later
• LabWindows/CVI Real-Time Module
• Microsoft Visual C++ (MSVC) 6.0 or later
• Microsoft Visual Basic 6.0

Installation Instructions

A self extracting executable has been created for this NI Driver CD. Save this file to disk and then run the executable selecting only the necessary drivers from the feature tree.

Your Feedback

Rate this document: Select a rating! 1 2 3 4 5
Answered Your Question? Yes No