NI-FBUS Configurator 3.2.1 - Windows 2000/Vista x86/XP - Communications Manager and Configurator Software

启动/升级

提醒： 使用本产品请先注册

说明

The NI-FBUS Configurator 3.2.1 is a free update to the NI-FBUS Software 3.2. The NI-FBUS Configurator 3.2.1 includes the NI-FBUS Communications Manager (CM) 3.2.1 and the NI-FBUS Configurator 3.2.1.

The NI-FBUS Configurator 3.2.1 includes the following features:

• Support for Windows Vista, the 32-bit version
• Support for DDS 5.0.5 specification.
• Support for EDDL extension.
• Support for OPC DA 3.0 specification.
• Integrates NI License Manager for software activation.
• Enhanced HSE network configuration in Interface Configuration Utility.
• New NI-FBUS library interface based on .Net framework with strong name.
• New Device Live List in NI-FBUS Configurator to display all live links and devices.
• Individual and configurable icons for each FF instrument device.

The NI-FBUS Configurator 3.2.1 supports Windows Vista, the 32-bit version; Windows XP Service Pack 2; and Windows 2000 Service Pack 4. The NI-FBUS Configurator does not support Windows Vista x64 Edition, the 64-bit version.

Install the NI-FBUS software before you install hardware such as the PCMCIA-FBUS, PCMCIA-FBUS Series 2, and PCI-FBUS/2 cards.

If you have both the NI-FBUS Software 3.2 and the NI-FBUS Monitor 3.0 installed on the same computer, you must upgrade the existing software to the NI-FBUS Configurator 3.2.1 and NI-FBUS Monitor 3.0.1.

If you have the NI-FBUS Software 3.2 installed on the computer, you do not need to uninstall that version before installing the NI-FBUS Configurator 3.2.1. If you have the NI-FBUS Configurator 3.1.1 or earlier installed on the computer, you first must uninstall that previous version from the computer before installing the NI-FBUS Configurator 3.2.1. You also must remove all existing NI-FBUS cards, such as the PCMCIA-FBUS, PCMCIA-FBUS Series 2, and PCI-FBUS/2 cards, from the computer.

When the installation is complete, the installer prompts you to activate the NI-FBUS Configurator. You also can activate the NI-FBUS Configurator later using the NI License Manager. You must activate the NI-FBUS Configurator before you can use the following features:

• Ethernet and High-Speed-Ethernet (HSE) Linking Device in the Add Interface Wizard, Interface Configuration Utility, and Communications Manager
• H1 interfaces (PCMCIA-FBUS and PCI-FBUS), HSE interfaces (Ethernet and HSE Linking Device), and CN2FF interfaces (ControlNet to Foundation Field)

You do not need to activate the NI-FBUS Configurator in the following situations:

• Upgrade the NI-FBUS Configurator from version 3.2
• Install the drivers for the following NI-FBUS cards: PCI-FBUS (Part Number 778573-01) and PCMCIA-FBUS (Part Number 777272-01/777282-02)
• Evaluate the NI-FBUS Configurator in offline mode

Technical support for National Instruments FOUNDATION Fieldbus products is available online. Please visit our FOUNDATION Fieldbus Support page, or use our Request Support system to contact NI for assistance.

功能

注册说明

When the installation is complete, the installer prompts you to activate the NI-FBUS Configurator. You also can activate the NI-FBUS Configurator later using the NI License Manager. You must activate the NI-FBUS Configurator before you can use the following features:

• Ethernet and High-Speed-Ethernet (HSE) Linking Device in the Add Interface Wizard, Interface Configuration Utility, and Communications Manager
• H1 interfaces (PCMCIA-FBUS and PCI-FBUS), HSE interfaces (Ethernet and HSE Linking Device), and CN2FF interfaces (ControlNet to Foundation Field)

安装注意事项

Install the NI-FBUS software before you install hardware such as the PCMCIA-FBUS, PCMCIA-FBUS Series 2, and PCI-FBUS/2 cards.

If you have both the NI-FBUS Software 3.2 and the NI-FBUS Monitor 3.0 installed on the same computer, you must upgrade the existing software to the NI-FBUS Configurator 3.2.1 and NI-FBUS Monitor 3.0.1.

If you have the NI-FBUS Software 3.2 installed on the computer, you do not need to uninstall that version before installing the NI-FBUS Configurator 3.2.1. If you have the NI-FBUS Configurator 3.1.1 or earlier installed on the computer, you first must uninstall that previous version from the computer before installing the NI-FBUS Configurator 3.2.1. You also must remove all existing NI-FBUS cards, such as the PCMCIA-FBUS, PCMCIA-FBUS Series 2, and PCI-FBUS/2 cards, from the computer.

反馈