LabVIEW Embedded Module for BlackFin Processors 2.5 - Windows 2000/Vista x86/XP

啟動/升級

提醒訊息： 使用本產品需經註冊

說明

The NI LabVIEW Embedded Module for ADI Blackfin Processors is a comprehensive graphical development environment for embedded design. Jointly developed by Analog Devices and National Instruments, this module seamlessly integrates the LabVIEW development environment and Blackfin embedded processors.

This module builds on NI LabVIEW Embedded technology, which facilitates dataflow graphical programming for embedded systems and includes hundreds of analysis and signal processing functions, integrated I/O, and an interactive debugging interface. With the Embedded Module for Blackfin Processors, you can enable cache, optimize linking, and view live front panel updates using JTAG, serial, or TCP/IP, as well as use VisualDSP++ compiler options through LabVIEW. The Embedded Module for Blackfin Processors includes the LabVIEW C Code Generator, which generates Ccode from the LabVIEW block diagram.

Engineers and scientists can lower development costs, achieve faster development times, and still deliver a high performance embedded processing solution with the Embedded Module for Blackfin Processors.

安裝說明

If you have LabVIEW 8.5 installed, you can install LabVIEW 8.5 with embedded support without first uninstalling LabVIEW 8.5. However, you must install VisualDSP++ 5.0 before you install the Embedded Module for Blackin Processors.

Complete the following steps to install VisualDSP++ 5.0 and the Embedded Module for Blackfin Processors.

1. Log in as an administrator or as a user with administrator privileges.
2. Insert the NI LabVIEW Embedded Module for ADI Blackfin Processors Installation DVD and select to install ADI VisualDSP++ 5.0.

Tip If the installer does not automatically begin, double-click VisualDSP++5.0.exe on the DVD to begin installation of VisualDSP++ 5.0.

3. Follow the instructions on the screen for installing VisualDSP++ 5.0.


When the VisualDSP++ 5.0 installation finishes, you can install the Embedded Module for Blackfin Processors.
4. Select to install the Embedded Module for Blackfin Processors. If the installer welcome screen is not visible, double-click setup.exe on the DVD to begin installation of the Embedded Module for Blackfin Processors.
5. Follow the instructions on the screen. The installation DVD installs both LabVIEW 8.5 with embedded support and the Embedded Module for Blackfin Processors.
6. Follow the activation instructions that appear on the screen.
   
   You also can use the NI License Manager, available by selecting Start»All Programs»National Instruments»NI License Manager, to activate National Instruments products. Refer to the National Instruments License Manager Help, available by selecting Help»Contents in the NI License Manager, for more information about activating NI products.
7. Restart the computer when the installer prompts you and log on as an administrator or as a user with administrator privileges.

安裝注意事項

The Embedded Module for Blackfin Processors has the following requirements:

• A desktop computer with Windows Vista/XP/2000
• Analog Devices VisualDSP++ 5.0 (included)
• LabVIEW 8.5 with embedded support (included)
• One of the following EZ-KITs:
  • EZ-KIT Lite for Analog Devices ADSP-BF537 Blackfin Processor (included)
  • EZ-KIT Lite for Analog Devices ADSP-BF533 (notincluded)
  • EZ-KIT Lite for Analog Devices ADSP-BF538 (notincluded)
  • EZ-KIT Lite for Analog Devices ADSP-BF548 (notincluded)

Refer to the LabVIEW Release Notes, available by selecting Start»All Programs»National Instruments»LabVIEW»LabVIEW Manuals and opening LV_Release_Notes.pdf, for more information about LabVIEW Development System requirements.

反馈