Academic Über NI Veranstaltungen NI Developer Zone Support Lösungen Online Store Kontakt MyNI

NI-SCOPE 3.4 - Windows 2000/Vista x64/Vista x86/XP

5 Bewertungen | 2.40 von 5
Dokument drucken

Verfügbare Downloads:

Standard-Download: NI-Scope 3.4(854 MB)

Ergänzende Dateien:

Download-Sprache : Englisch
Produktfamilie: Digitizers/Oscilloscopes
Version: 3.4
Erscheinungsdatum: 10-2007
Softwaretyp: Hardware Driver
Betriebssystem: Windows 2000; Windows Vista x64; Windows Vista x86; Windows XP

Beschreibung

NI SCOPE 3.4 contains all the features of NI SCOPE 3.3.2 and adds support for:

  • NI USB-5132
  • NI USB-5133

Supported Hardware:
NI 5102, NI 5105, NI 5112, NI 5114, NI 5122, NI 5124, NI-5132 (new), NI-5133(new), NI 5142, NI 5152, NI 5620, NI 5621, NI 5911 and NI 5922

Minimum Application Development Environments for NI-SCOPE 3.4:
  • LabVIEW 7.1.1 or later
  • LabVIEW Real-Time Module 7.1.1 or later (If you are running your application on an RT target, at least 128 MB of memory is required)*
  • LabWindows/CVI 7.1 or later
  • LabWindows/CVI Real-Time Module
  • Microsoft Visual C++ (MSVC) 6.0 or later
  • Microsoft Visual Basic 6.0

For more details on NI-Scope 3.4, view the readme.

*Note: The following devices, configurable only under Traditional DAQ, are not supported under the LabVIEW Real-Time Module:NI-5102, NI-5112, NI-5620, NI-5621, and NI-5911. See the NI High-Speed Digitizers Help for more information on using NI-Scope with the LabVIEW Real-Time Module.

Anleitungen zur Installation

Download the Installation Instructions above for complete installation instructions.

Feedback