NI-RFSG 1.3.1 - Windows 2000/Vista x64/Vista x86/XP

2 ratings | 3.00 out of 5

Print Document

Description

NI-RFSG version 1.3.1 for Windows Vista / XP / 2000.

NI-RFSG 1.3.1 includes the following new features:

• Improved modulation specifications for NI PXIe-5672
• The "if/else" script instruction is supported on the NI PXIe-5672

NI-RFSG 1.3.1 provides driver support for:

• NI PXI-5670 RF Vector Signal Generator
• NI PXI-5671 RF Vector Signal Generator
• NI PXIe-5672 RF Vector Signal Generator (Windows Vista, XP only)
• NI PXI-5610 RF Upconverter
• NI PXI-5650 RF Signal Generator
• NI PXI-5651 RF Signal Generator
• NI PXI-5652 RF Signal Generator

Minimum Application Development Environments:

You can use NI-RFSG in the LabVIEW and LabWindows/CVI application development environments (ADEs). The minimum versions of these ADEs that can be used with NI-RFSG are listed below.

Supported Application Development Environments:

• NI LabVIEW 7.1 (or later) Full Development System or Professional Development System
• NI LabWindows/CVI 7.1 (or later)

Additional Software Required (installed by NI-RFSG 1.3):

• NI-DAQmx 8.6 (or later)
• NI-FGEN 2.5.1 (or later)
• NI-VISA 4.2 (or later)
• NI Measurement and Automation Explorer 4.3(or later)
• IVI Compliance Package 3.1 (or later)

Supported Hardware:

NI PXI-5670, NI PXI-5671, NI-PXIe-5672 (Windows Vista, XP only), NI PXI-5610, NI PXI-5650, NI PXI-5651, NI PXI-5652

Your Feedback

Rate this document: Select a rating! 1 2 3 4 5
Answered Your Question? Yes No