아카데믹 회사 소개 행사 및 세미나 NI Developer Zone 기술 지원 솔루션 제품 및 서비스 문의 MyNI

NI-DAQmx 8.7.1 - Windows 2000/Vista x64/Vista x86/XP

46 평가 등급 | 3.41 중 5
인쇄

사용가능한 다운로드:

다운로드 옵션:

1.
NI Downloader: nidaq871f3_downloader.exe(839 MB)
NI 권장 사항

NI는 Windows용 NI Downloader를 권장합니다. NI Downloader는 다음을 제공합니다.:
  • 더욱 안정적인 다운로드 환경
  • 예기치 않은 문제 발생시 자동으로 다운로드 재시작
  • 다운로드 작업 중 일시적으로 PC에서 동작
  • "중지 및 재시작" 기능 제공

2.
표준 다운로드: NI-DAQmx 8.7.1(839 MB). 표준 다운로드:
  • PC로 직접 다운로드
  • 예기치 않은 문제 발생시 파일 다운로드가 안정적이지 않을 수 있음
  • "중지 및 재시작" 기능을 제공하지 않음

지원 파일:

다운로드 언어: 중국어 (간자체); 영어; 프랑스어; 독일어; 일본어; 한국어
제품군: Multifunction DAQ
버전: 8.7.1
출시일: 02-2008
소프트웨어 타입: Hardware Driver
운영체제: Windows 2000; Windows Vista x64; Windows Vista x86; Windows XP

제품 등록 / 업그레이드

이 업그레이드는 자동적으로 SSP 및 프리미어 고객에게 제공됩니다. 업그레이드에 관심이 있으시다면, 업그레이드 어드바이저를 확인하세요.

설명

Thank you for using NI-DAQmx, version 8.7.1. This release resolves an issue with unexpected analog output values on NI USB-6211, NI USB-6212, NI USB-6216, NI USB-6215, and NI USB-6218 devices.

NI-DAQmx 8.7.1 can be obtained by either using the National Instruments Downloader available above, or directly at http://ftp.ni.com/support/softlib/multifunction_daq/nidaqmx/8.7.1/NIDAQ871f3.exe. When the National Instruments Downloader completes downloading the distribution you will be able to launch the installer. The National Instruments Downloader will automatically remove itself from your computer after it completes.

NI-DAQmx 8.7.1 is the latest measurement services software for your data acquisition and signal conditioning devices.

The following main features were added in NI-DAQmx 8.7.1:

  • Newly supported devices in NI-DAQmx—NI 9225, NI 9229 (BNC), NI 9235, NI 9236, NI 9239, NI 9239 (BNC), NI 9263 (BNC), NI USB-6281 (Mass Termination and Screw Terminal), NI USB-6289 (Mass Termination and Screw Terminal), NI USB-6509, NI USB-9229, NI USB-9229 (BNC), NI USB-9239, NI USB-9239 (BNC), and NI USB-9263 (BNC). Refer to Device Support in the NI-DAQ Readme for a complete list of devices.
  • Shunt calibration—Shunt calibration is now supported for both bridge and strain gage sensors..
  • SCXI calibration—Channel calibration is now supported for the SCXI-1122 and SCXI-1521.
  • NI LabVIEW 8.5.1 support in addition to LabVIEW 8.x and LabVIEW 7.1
  • NI 6509 and NI 651x devices now support the DI.MemMapEnable and DO.MemMapEnable properties. DI.MemMapEnable is turned on by default, but DO.MemMapEnable must be turned on manually.
  • NI 6509 devices now support the DO.Tristate property.
  • NI 9219 ADC timing mode is now configurable within the DAQ Assistant.
  • DAQ Assistant support for SignalExpress 2.5

설치 안내

Perform the following steps to install NI-DAQmx:

  1. Download and run the self-extracting executable NIDAQ871f3.exe.
    This will install NI-DAQmx 8.7.1 and all necessary driver files.
  2. You can optionally download and run the self-extracting executable for the NI-DAQmx Device Documentation 8.7.1. (Linked Below)
    This will install the device documentation for the hardware supported in this release of NI-DAQ.

To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future.

설치 노트

The NI-DAQmx distribution is packaged as a self-extracting archive that will automatically launch the driver installer. By default, files are extracted to C:\National Instruments Downloads\NI-DAQmx\8.7.1\ and can be deleted to conserve disk space. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future.

설치 자료

더 많은 정보

피드백