學術專區 關於NI NI活動訊息 NI Developer Zone 技術支援服務 使用者解決方案 產品與服務 連絡NI MyNI

NI-DAQmx 8.7.1 - Windows 2000/Vista x64/Vista x86/XP

45 評分 | 3.47 之 5
列印檔案

可進行的下載作業:

下載選項:

1.
NI Downloader: nidaq871f3_downloader.exe(839 MB)
NI 推薦使用

NI 針對 Windows 推薦使用 NI Downloader for Windows。NI Downloader 可：:
  • 提供更穩定的檔案下載程序
  • 若下載作業意外中斷，可自動銜接下載作業
  • 下載作業期間，暫時於使用者的電腦中執行
  • 具有「暫停」與「繼續」功能

2.
標準下載作業: NI-DAQmx 8.7.1(839 MB). 標準下載作業:
  • 直接下載至電腦
  • 下載作業若不甚穩定，可能是肇因於網路連結突然中斷
  • 並不提供「暫停」與「繼續」功能

所支援的檔案:

下載語言: 中文 (簡體); 英語; 法文; 德文; 日文; 韓文
產品線: Multifunction DAQ
版本: 8.7.1
發表日期: 02-2008
軟體種類: Hardware Driver
作業系統: Windows 2000; Windows Vista x64; Windows Vista x86; Windows XP

啟動/升級

SSP 及 Premier 用戶可取得自動升級，若您亦對此項升級有興趣，請使用 Upgrade Advisor。 。

說明

Thank you for using NI-DAQmx, version 8.7.1. This release resolves an issue with unexpected analog output values on NI USB-6211, NI USB-6212, NI USB-6216, NI USB-6215, and NI USB-6218 devices.

NI-DAQmx 8.7.1 can be obtained by either using the National Instruments Downloader available above, or directly at http://ftp.ni.com/support/softlib/multifunction_daq/nidaqmx/8.7.1/NIDAQ871f3.exe. When the National Instruments Downloader completes downloading the distribution you will be able to launch the installer. The National Instruments Downloader will automatically remove itself from your computer after it completes.

NI-DAQmx 8.7.1 is the latest measurement services software for your data acquisition and signal conditioning devices.

The following main features were added in NI-DAQmx 8.7.1:

  • Newly supported devices in NI-DAQmx—NI 9225, NI 9229 (BNC), NI 9235, NI 9236, NI 9239, NI 9239 (BNC), NI 9263 (BNC), NI USB-6281 (Mass Termination and Screw Terminal), NI USB-6289 (Mass Termination and Screw Terminal), NI USB-6509, NI USB-9229, NI USB-9229 (BNC), NI USB-9239, NI USB-9239 (BNC), and NI USB-9263 (BNC). Refer to Device Support in the NI-DAQ Readme for a complete list of devices.
  • Shunt calibration—Shunt calibration is now supported for both bridge and strain gage sensors..
  • SCXI calibration—Channel calibration is now supported for the SCXI-1122 and SCXI-1521.
  • NI LabVIEW 8.5.1 support in addition to LabVIEW 8.x and LabVIEW 7.1
  • NI 6509 and NI 651x devices now support the DI.MemMapEnable and DO.MemMapEnable properties. DI.MemMapEnable is turned on by default, but DO.MemMapEnable must be turned on manually.
  • NI 6509 devices now support the DO.Tristate property.
  • NI 9219 ADC timing mode is now configurable within the DAQ Assistant.
  • DAQ Assistant support for SignalExpress 2.5

安裝說明

Perform the following steps to install NI-DAQmx:

  1. Download and run the self-extracting executable NIDAQ871f3.exe.
    This will install NI-DAQmx 8.7.1 and all necessary driver files.
  2. You can optionally download and run the self-extracting executable for the NI-DAQmx Device Documentation 8.7.1. (Linked Below)
    This will install the device documentation for the hardware supported in this release of NI-DAQ.

To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future.

安裝注意事項

The NI-DAQmx distribution is packaged as a self-extracting archive that will automatically launch the driver installer. By default, files are extracted to C:\National Instruments Downloads\NI-DAQmx\8.7.1\ and can be deleted to conserve disk space. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx distribution in the future.

安裝來源

更多資訊

反馈