Éducation Société Événements NI Developer Zone Support Solutions Produits et Services Contacter NI MyNI

NI-DAQmx Base 3.1 - Mac OS X

10 évaluations | 3.60 parmi 5
Imprimer le document

Téléchargements disponibles:

Téléchargement standard: NI-DAQmx Base 3.1(232 MB)

Fichiers supportés:

Langue de téléchargement: Anglais
Ligne de produits: Multifunction DAQ
Version: 3.1
Date de parution: 01-2008
Type de logiciel: Hardware Driver
Système d'exploitation: Mac OS X

Description

Thank you for using NI-DAQmx Base, version 3.1 for Mac OS X.

The NI-DAQmx Base 3.1 software provides LabVIEW and C Application Programming Interfaces (APIs) which allows you to create applications for your National Instruments DAQ devices which will run on Mac OS X.

The following main features were added in NI-DAQmx Base 3.1

  • Newly supported devices in NI-DAQmx Base—NI USB-9215A, NI USB-9211A, NI USB-6210, NI USB-6211, NI USB-6215, and NI USB-6218. Refer to the Supported Functionality section in the NI-DAQ Readme for more details.
  • New OS Support—NI-DAQmx Base now supports the following versions of Mac OS X:
    • Mac OS X 10.4 (Tiger) on Intel or PowerPC
    • Mac OS X 10.5 (Leopard) on Intel or PowerPC
  • LabVIEW 8.5 Support—in addition to LabVIEW 8.0 and LabVIEW 8.2.

Refer to the NI-DAQmx Base Readme for more information about the NI-DAQmx Base driver and differences between NI-DAQmx Base and NI-DAQmx.

Fonctionnalités

  • Support for over 80 National Instruments DAQ devices including several USB DAQ devices.
  • A high-level interface based on a subset of the popular NI-DAQmx driver for DAQ Devices on Mac OS X.
  • Numerous examples demonstrating the use of both the C or LabVIEW APIs.

Instructions d'installation

  1. Download NI-DAQmx_Base_3.1.0.dmg
  2. Double click on NI-DAQmx_Base_3.1.0.dmg to launch the disk image
  3. Double click on NI-DAQmx_Base_3.1.0.mpkg to run the NI-DAQmx Base installer

Plus d'information

Commentaires