NI-DAQmx Base 3.1 - Windows CE/Mobile 5/Vista x64/Vista x86/XP

17 평가 등급 | 3.65 중 5

인쇄

설명

Thank you for using NI-DAQmx Base, version 3.1 for Windows, PDA, and Touch Panel.

The NI-DAQmx Base 3.1 software provides LabVIEW and C Application Programming Interfaces (APIs) which allows you to create applications for your National Instruments DAQ devices which will run on Windows. It also provides APIs to program your DAQ device with the LabVIEW PDA or TouchPanel modules

Refer to the NI-DAQmx Base Readme for more information about the NI-DAQmx Base driver and differences between NI-DAQmx Base and NI-DAQmx.

특징

설치 안내

Perform the following steps to install NI-DAQmx Base:

1. Download and run the self-extracting executable NIDAQmxBase310.exe.
2. This will install NI-DAQmx Base 3.1 and all necessary driver files.

To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx Base distribution in the future.

설치 노트

The NI-DAQmx Base installer is packaged as a self-extracting archive that will automatically launch the driver installer. By default, files are extracted to C:\National Instruments Downloads\NI-DAQmx Base\NIDAQmxBase310\ and can be deleted to conserve disk space. It is recommended that you keep the extracted installation files in case you need to add features from NI-DAQmx distribution in the future.

피드백

내용 평가 등급을 선택하세요. 1 2 3 4 5
질문에 대한 답변이 되셨습니까? 예 아니오