NI-Serial 1.8 - Windows/2000/Server 2003/Server 2003 x64/XP/XP x64

7 ratings | 3.71 out of 5

Print Document

Description

Support for Windows XP x64 and Windows Server 2003 x64
NI-Serial for Windows, Version 1.8, adds support for Microsoft Windows XP x64 and Windows Server 2003 x64 for all PCI, PXI, and PCMCIA interfaces.

Baud rates up to 3 Mb/s
NI-Serial for Windows, Version 1.8, adds support for custom baud rates up to 3 Mb/s on PCI/PXI-8431/8433 hardware. The two-wire auto control mode for RS-485 transceiver control has a maximum baud rate of 2 Mb/s.

New communication utility
NI-Serial for Windows, Version 1.8, includes a new serial communication utility. The Serial Communicator can be used to test serial hardware configuration and communication. The Serial Communicator is available in Measurement & Automation Explorer.

Other information
The niser180.exe is a self-extracting executable that contains the installation files for version 1.8 of the driver software for National Instruments serial hardware. This version of the driver supports the AT-232/485 Series, PCMCIA-232/485 Series, PCI-232/485 Series, PXI-842x, PXI/PCI-843x, ENET-232/485, and USB-232/485 devices.

Note: If you are using Windows 9x or NT, then you need the NI-Serial 1.5 driver for plug-in devices, or 1.0.1 for the ENET-232/485 on just Windows NT. The PCI-843x and PXI-843x are not supported with NI-Serial 1.5 or earlier. See the Readme.html for more details.

Note: This driver includes the support for USB and ENET devices that previously required NI-Serial for USB and NI-Serial Device Server for ENET.

Note: NI-Serial for Windows only supports National Instrument serial products

Your Feedback

Rate this document: Select a rating! 1 2 3 4 5
Answered Your Question? Yes No